6.4 User Interface
Below (Figure 8) is an annotated screenshot of the RedSolve user interface.
The annotated sections of the user interface are:
1. Measurement toolbar.
2. Data visualisation toolbar.
3. Full-spectrum thumbnail plot. This panel will always display the full data range
acquired.
4. Status bar.
5. Regions of Interest (ROIs). A region of interest (ROI) can be created to inspect a
subset of the collected data. Multiple ROI panels can be created.
Detector temperature and relative humidity (for cooled detectors only).
6.
© Redback Systems Pty Ltd
Figure 8: The RedSolve main window.
v1.5
14