6.4.1 Toolbar Actions
All action buttons and menu selections contain mouseover text where appropriate. The
following table briefly describes the most commonly used actions.
Acquire
Exposure time
Live view
Save
Load
New ROI
Set Dark
Set Flat
Subtract Dark
Show Flattened
© Redback Systems Pty Ltd
Exposes the detector for the set exposure
duration and converts the image into data.
The detector exposure time in seconds.
Refreshes the spectrum as quickly as possible.
The refresh rate is limited by the exposure time
and the data processing time. No data is recorded
from Live view.
Saves the spectrum data to a *.csv file. The user
will be prompted to confirm the saving directory
and filename.
Load previously saved data for further exploration
or processing.
Creates a new region of interest (ROI).
Set the current data as a dark frame to allow dark
subtraction.
Set the current data as a spectrally flat frame to
allow amplitude compensation for the echelle
blaze angle modulation.
Subtract the current dark frame from the
measured data. Can be toggled on and off as
desired without reacquiring data.
Apply the flat-fielding compensation for the
echelle blaze angle modulation. Useful when
visualising broader spectral features.
v1.5
15