Wavelength Calibration - Redback RS40k User Manual

6.3 Wavelength Calibration

Each spectrometer is shipped with a unique calibration file. As part of the spectrometer
installation process you must first load your calibration data from the USB drive. If no
calibration file has been previously used, you will be prompted by the below dialogue.
Once the calibration file is loaded you can use RedSolve to acquire data.
Figure 6: A warning to load the calibration file is shown on startup.
Clicking OK will take you directly to the settings window where you can load the
included calibration file. You must click OK or Apply in the settings window to activate
the calibration file. The Settings dialog can also be accessed from the Options menu.
Figure 7: Load your calibration file from the USB drive into RedSolve.
© Redback Systems Pty Ltd v1.5 13