Device Pairing And Connecting - Renishaw RCS T Series User Manual

Device pairing and connecting

3. Connect all three RCS L-90 struts to the RCS T-90 interface. Use the
unique shapes to ensure the appropriate strut and extension is attached
to its corresponding input.
NOTE: Use the cable identifier tags to ensure that previously paired
RCS L-90 struts are correctly paired with their corresponding interface port.
4. If the RCS L-90 struts have not yet been paired, connect each strut to an
interface port.
5. Press the 'pair' button in the RCS Software Suite. If the device has been
successfully paired, the software will move to the calibration screen.
NOTE: Once paired, use the cable identifier tags to distinguish the unique
shape allocated to each RCS L-90 strut.
www.renishaw.com 15