Charging The Power Station - 70mai Hiker 400 User Manual

Charging the power station

Power station comes with 3 ports for recharging:
• DC input port (5525): Can be connected to car charging cable, AC power adapter, or the 5525 connector of the solar panel.
• Andersen port: Can be connected to Anderson connector of the solar panel.
• Type-C port: Can be connected to Type-C charging cable.
You can use the Type-C port for recharging jointly with the DC input port (5525) or the Anderson port.
Notes:
• The DC input port (5525) and Andersen port cannot be connected simultaneously.
• While charging, do not plug and unplug the charging cable continuously in a short period of time. Plug the charging cable back after a 10 second interval after
unplugging it.
1. Connect the car charging cable to
the DC input port (5525) and attach
the other end to the cigarette lighter
of the car.
2. The power station can be charged
when car is started and the car's
cigarette lighter port is energized.
1. Select to connect to either the DC
input port (5525) or the Anderson port
according to the shape of the solar
panel's output interface.
2. The open-circuit voltage of the solar
panel should be between 12 and 24V.
3. Supports up to two 70mai portable solar
panels in parallel.
1. Connect the output cable of the AC
power adapter to the DC input port
(5525).
2. Connect the two-pin plug to the
power socket.
1. Connect the Type-C charging cable to
the Type-C port.
2. Connect the Type-C charging cable to a
standard PD power adapter purchased
from a qualified manufacturer.
3. The maximum power supported by the
power adapter is PD 100W.
Note: Please turn on the power station when using the Type-C port to
recharge the power station.
07