Important Safety Instructions; Charging Safety - 70mai Hiker 400 User Manual

Please read this manual carefully before using the product and keep it in a safe place for future reference.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: The following safety precautions should be followed when using this product. Improper handling may cause damage to the product or personal property, or
even cause serious personal injury. The Company shall not be liable for any damage caused by incorrect operation.
1. Before using this product, please read the manual to ensure correct and safe use.
2. To reduce the risk of injury, close attention is required when using this product near children.
3. Do not put fingers, palms, or any part of the body into the product to avoid personal injury.
4. Do not use non-original or third-party accessories, as this may result in product incompatibility, product damage or even personal injury.
5. To avoid damage to the product, if it is required to disconnect the power input of the product, unplug the power cable from the power socket first.
6. Do not use modified or damaged batteries, as this may cause fire, explosion, or other personal injuries.
7. Do not use this product with a damaged power cable, plug or output cable as this may pose a risk of electric shock.
8. Do not disassemble the product by yourself, otherwise it may cause fire or electric shock. If a fault occurs during the use of this product, stop using it and contact the
service center.
9. If the product malfunctions, unplug the power cable of the product from the socket to reduce the risk of electric shock.
Safety use
1. Please use the product in a dry and ventilated environment. The product is not waterproof. Do not expose the product to any liquid. Do not use the product in a humid
environment as this may cause a short circuit, electric shock, fire, or even explosion.
2. Use the product in a temperature range of 14°F to 104°F (-10°C to 40°C).
3. Do not use the product in a strong electrostatic or electromagnetic environment, as this may cause the product to malfunction.
4. Do not disassemble or puncture the product, as this may cause battery leakage, fire, or even explosion.
5. If the product suffers a strong impact or falls from a high place, do not use it again.
6. If the product falls into the water during use, place it in a safe, open area and let it air dry. Do not use the product again even after it has dried.
7. Do not place the product in a microwave oven or any pressurized container.
8. Do not put foreign metal objects into the product to avoid short-circuiting the battery.
9. Avoid colliding the product against other hard objects. Do not place any heavy objects on the product.
10. In extreme cases, the product may eject liquid. Avoid direct contact with the ejected liquid. In case of accidental contact with skin, rinse immediately with plenty of
water. If the liquid comes into contact with the eyes, seek medical attention immediately. The liquid ejected from the battery may irritate or burn the skin.
11. Do not connect the product output to a power grid.
12. If the groove beneath the handle is covered with water, wipe it with a dry, soft cloth. Do not tilt or turn over the product to drain away water. Water may flow into the
inside of the product through the ventilation holes on both sides and cause damage to the product.

Charging safety

1. Charge the product in a temperature range of 32°F to 104°F (0°C to 40°C). Ensure the environment is dry and ventilated. Charging voltage should not exceed the
01