70mai Hiker 400 User Manual page 6

1. LCD display
When the power station is turned on, the LCD display automatically lights up. By
default, the display screen turns off automatically after 30 seconds without any
button operation. The display auto-off time can be set via the 70mai app.
2. Car port
Applicable to general car electrical appliances, with a maximum output current
of 10A.
3. 5521 output port
Applicable to devices charged through 5521 port.
4. DC output button & DC output indicator
• This button controls output of the car port, 5521 port and all the USB-A ports.
• When the power station is running, press this button to enable/disable the DC
output. The indicator will turn on/off accordingly.
5. QC USB-A output port
• Applicable to devices charged through USB-A port and supports up to 18W
quick charge. Devices connected to this port that do not support quick charge
are still charged at standard speed.
• When this port is used jointly with other USB-A ports, it no longer supports
quick charge but outputs at a power same to other USB-A ports.
6. USB-A output ports
Applicable to devices charged through USB-A port, such as mobile phones and
tablets.
7. Power button
• Press and hold this button to turn on/off the power station.
• When power station is running, press this button to light up/turn off the LCD
display.
8. Type-C port (Input & output)
• Input: Connect Type-C charging cable to this port and connect a PD power
adapter to the power socket to recharge the power station. Supports a
maximum input power of 100W.
• Output: Applicable to devices charged through Type-C port and supports up
to 100W quick charge. Devices connected to this port that do not support
quick charge are still charged at standard speed.
• Turn on the power station first when using the Type-C port as input or output.
9. Function button & Indicator
• When power station is running, press this button to enable/disable ECO
(Auto turn off output for no load) function, and the indicator will turn on/
off accordingly.
• When power station is running, press and hold this button to enter the
Bluetooth discoverable mode.
• During the Bluetooth pairing, press this button to confirm the authorization.
• When power station is running, press this button 5 times in a row to restore
the factory settings.
10. DC input port (5525)
• Connect AC power adapter to this port, with the other end connecting to the
power socket to recharge the power station.
• Connect car charging cable or solar charging cable to this port to recharge
the power station.
11. Anderson port
Connect the Anderson connector of the solar charging cable to this port to
recharge the power station.
12. AC output button & AC output indicator
• When power station is running, press this button to enable/disable the AC
output. The indicator will turn on/off accordingly.
• Within 10 seconds after the AC output is enabled, press and hold this button
for about 3 seconds to switch AC output working frequency.
13. AC output port
Applicable to devices with rated power less than 400W and surge power less
than 800W.
14. LED light button
• When power station is running, press this button to circularly switch the LED
light among Low brightness, Medium brightness, High brightness and Off
modes.
04