Turning On/Off; Troubleshooting Guide - 70mai Hiker 400 User Manual

13. Fan icon: When the ambient temperature of the power station is too high or
the load is too large, the temperature-controlled electric fan inside the power
station is turned on and this icon will be shown.
14. Bluetooth: Bluetooth is always on by default. When the Bluetooth is
discoverable, this icon flashes.
* Low load indicates the case when AC output is lower than 10W or DC output
(car port or 5521 port) is lower than 2W and USB-A port is lower than 100mA.
The default low load duration is 1 hour.

Turning on/off

Press and hold the power button to turn on/off the power station.
The power station automatically turns off in the following situations:
• If no button action, no charging or discharging operation, LED light is off, and
timing function is disabled, and such operation condition lasts for 10 minutes,
the power station will then automatically turn off.
• If the built-in battery power is low, the power station will automatically turn
off.
How to use
1. When power station is turned on, press the DC or AC output button. The
corresponding output indicator lights up and the output port is turned on.
2. Connect the power supply cable of the electrical equipment to the output port
of the power station.
When using the AC output port, check the AC output working frequency on
the LCD display. If it complies with the local regulations, the port can be used
directly, otherwise, press and hold the AC output button for about 3 seconds
within 10 seconds after AC output is enabled to change to appropriate AC
output working frequency.
3. After using the power station, press the DC or AC output button to turn off
the output port and the corresponding output indicator turns off.
Notes:
• The Type-C port can be used directly after the power station is turned on.
After using this port, unplug the Type-C cable directly.
• Battery power may be slightly lost during transportation and storage. Before
using the power station for the first time, it is recommended to fully charge
the power station.
Downloading 70mai App
This product can be used with 70mai app. Please
search for "70mai" in the app store or scan the QR
code to download and install the app.
The firmware version of the product will be updated
through the 70mai app. It will take a few minutes for
the product to complete the update. Please make
sure the battery level is above 20% during the update
process.

Troubleshooting guide

When a fault code is displayed on the LCD display,
please refer to the Online Troubleshooting Guide by
scanning the QR code or via 70mai app to identify
the fault phenomenon and find the corresponding
solution.
06