SNAPCYCLE Infinity User Manual page 15

4.4.3 Parameter Setting on the Display
You can refer to the guide in this section to adjust the parameter settings on the LCD display to
better suit your personal need or preference.
CAUTION: Please check your local rules and regulations before you make any adjustment to the
parameter settings of your ebike (e.g. speed limit). Make sure you operate the ebike in accordance
with local rules and regulations in your area.
Getting started:
Press and hold Power & Mode buttons together for 1 second can get into setting menus.
Press Mode button to change the parameter setting.
Press Power button can switch to next item.
Press and hold Power & Mode buttons together for 1 second will exit from menu.
Note: Display will automatically quit menu when there is no operation for 10 seconds.
* For safety reasons, display can't get into MENU when riding.
* Display will quit MENU when start riding
The parameters will be displayed in the following order:
Cr
Ar
HP
b1
S7
SA AS
H6 Sd
Pd
OF
HL
SP
CL
Hd
bU
PS
11