Advertisement
PRODUCT OVERVIEW
Adjustable
Stem
Upper Clamp
Lower Clamp
PU Wheel
HOW TO RIDE
Gently kick off the ground to
Step 1.
manually generate speed.
Power
Indicator
Foot
Brake
Motorized
Charging
Wheel
Port
Always wear suitable, age-appropriate protective gear when riding. Charge the scooter before using
it and make sure the scooter is fully charged before riding. For the safety of yourself and those around you,
and to extend the battery's life, please be sure to follow charging instructions.
When the scooter reaches 3 mph, the rear motor
Step 2.
will automatically engage and boost speeds up
to 6.2 mph.
Assembly
Press down on the rear brake to
Step 3.
slow down.
CHARGING INSTRUCTIONS
Make sure the scooter is powered off.
Step 1.
Connect the charger's cables and adapter if
needed.
Plug the charger into a wall outlet
Step 2.
(100V-240V; 50-60Hz) then plug the other
end into the scooter.
Allow 3 hours for charging. The battery
Step 3.
indicator on the charger will stay red during
charging and turn green once charging
is complete. Disconnect all cables once
charging is finished.
• DO NOT, under any circumstances, use the scooter
while it is charging or connected to the charger.
• The charging time is approximately 3 hours. Charging
longer than that may affect battery life and/or
performance.
• Use only the charger provided with your Swagger
Discovery. If you have lost or misplaced your charger,
contact customer support to obtain a replacement.
Advertisement
