Hand-Look Quilting Stitch - Singer 398054 Operation And Safety Notes

INSERTING ZIPPERS AND PIPING
Use zipper foot to sew to the right or left of the
zipper or close to the cord.
INSERTING ZIPPERS
To sew down the right side, attach left side of
zipper foot to presser foot holder so that the
needle passes through the opening on the left
side of the foot.
To sew down the left side, attach right side of
foot to foot holder.
PIPING
To pipe soft furnishings, cover cord with a bias
strip of fabric and pin or tack it to the main
piece of fabric. Attach right side of zipper foot
to foot holder so that needle passes through
the opening on the right side of the foot.
Helpful Hint: Slight adjusting of the needle posi-
tion to sew closer to the piping may be accom-
plished with the Stitch Width Control.

HAND-LOOK QUILTING STITCH

This stitch is designed to look like hand sew-
ing for topstitching and quilting.
1. Thread bobbin with desired top stitching
color. When sewing the machine will pull
this thread to the top.
2. Thread machine with invisible or lightwei-
ght thread the color that matches your
fabric. This thread should not show.
3. Increase thread tension a little bit at a time
until you achieve the desired appearance.
4. Start to sew.
NOTE: For a dramatic appearance, experiment
with different tension and stitch length combi-
nations.
22 –EN
Needle to left of Needle to right
foot of foot