Installation Or Removal - Sapho KTX-C User Manual

Installation or removal

Detailed information demonstrating the different ways of install-
ing or removing a radiator heating element is available from the
manufacturer or importer (see footnotes at the end of the manual).
Below we list some basic requirements and principles which must
be followed to ensure long term, reliable operation of the product.
8% (20°C)
When the heating element is installed horizontally, it must be rota-
ted to such an extent that the single tube, which houses the tem-
perature sensor, is positioned as low as possible.
EN
Before installation or first use:
1. Read the chapter Safety requirements —Installation.
2. Fit the heating element using the correct spanner (size
3. The heating element must be installed at the bottom of the
radiator, perpendicular to the radiator pipes, while preserving
space for the proper circulation of the heating medium.
4. Use a suitable heating medium for filling the electric radiator,
i.e. (water, special products based on water and glycol for use
in central heating systems, or oil which complies with the re-
quirements of the manufacturer of the radiator and heating
element).
5. Check the distances between the individual heating element
tubes and bend if necessary.
150°
5 mm
2-3 mm
User Manual — Electric Heating Element
24).
59