Anti-Freeze Function - Sapho KTX-C User Manual

Setting 1 Setting 2 Setting 3
TIMER mode
TIMER Mode is activated by pressing the button
turns on).
1. TIMER Mode can be used to TURN OFF the device:
Press button while the device is on — the device will turn
off after 2 hours.
2. TIMER Mode can also be used to TURN the device ON:
Turn the device off using the button
the device will turn on after 2 hours, with the same tempera-
ture it was set to prior to being turned off. If the required tem-
perature is different to the one from before when the device
was turned off, set the required temperature before turning the
device off.
TIMER Mode can be turned off in at any time by pressing button.
EN
Setting 4 Setting 5
(yellow diode
, press the button —

ANTI-FREEZE function

When the device is off or in the TIMER mode but still has a live
feed, and the temperature inside the room falls down below 6°C
the device will automatically turn on and start heating. This function
will prevent the heating medium inside the radiator from freezing.
Yellow diode is flashing until the temperature reaches 6°C.
User Manual — Electric Heating Element
63