Table of Contents
Advertisement
Operating Precautions
Do not insert fi ngers or sticks into the
air inlets and outlets
The internal fans rotate very fast and may
cause injury. (Air-cooled models)
Prohibited
Do not touch electronic components or
operate switches with wet hands
Doing so may cause electric shock.
Do not
touch with
wet hands
Do not use fl ammable sprays near the
cooler, and do not place fl ammable
materials nearby
Sparks from the switches may cause objects to
Flammable
materials
catch fi re.
prohibited
Perform regular inspections to check
for damage to installation over long-
term use
If left in a damaged state, the condensing unit
Perform
regular
could fall over or drop, which may lead to injury
inspections
Do not touch the unit inlet or aluminium
fi ns
Otherwise, injury may result.
Prohibited
Moving and Repair Precautions
The condensing unit must never be
disassembled or repaired by persons
other than repair technicians and
specialists
Do not
disassemble
Faulty operation may lead to injury. Improper
repair may cause electric shock, fire, rupture,
injury, and water leakage.
Consult your sales representative or specialist for moving and repairs
Lack of specialist knowledge may lead to electric shock, fi re, and rupture.
Instructions
WARNING
Do not expose the product directly to
water, and do not use water for cleaning
Doing so may cause electric shock or fi re.
Water
washing is
prohibited
CAUTION
Always switch the power supply circuit
OFF for cleaning, adjustments, and
inspections
Electric shocks and injury from the fans may
Turn off
the power
result.
Do not climb, stand, or sit on the
condensing unit, and do not place
objects on it
Dropping and falling over may cause injury.
Do not stand,
climb, or sit
Do not touch pipes and wiring
Touching exposed pipes or wiring may cause
Prohibited
burns and electric shocks.
Only the operator should touch the
condensing unit
Surround the condensing unit with protective
gates if there is a risk of persons other than the
Do not
touch
operator touching it.
Mishandling may lead to injury.
WARNING
When an error occurs, stop operation
and switch the power supply OFF.
Contact your sales representative or
installer.
Turn the
power OFF in
Continued faulty operation may cause
case of error
electric shock and fi re.
4
Advertisement
Table of Contents
