Installing The Driver For The Pmc 8885E; Installing Drivers For The Red Hat Enterprise Linux Operating System; Installing The Driver For The Chipset; Installing The Driver For An Onboard Graphics Card - Lenovo ThinkServer RD650 Operating System Installation Manual

rpm-ivh *.rpm
Note: In the command lines, rpms-2 represents the name of the folder that contains the driver. *.rpm
represents the driver name. Use the corresponding file name on your server.
4. Restart your server.

Installing the driver for the PMC 8885e

To install the driver for the PMC 8885e, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder.
Then, copy the RPM file to your USB storage device and connect the USB storage device to your server.
2. Copy the RPM file from your USB storage device to the /tmp directory on your server.
3. Use the following commands to install the driver:
cd /tmp
cd rpms-2
rpm-ivh *.rpm
Note: In the command lines, rpms-2 represents the name of the folder that contains the driver. *.rpm
represents the driver name. Use the corresponding file name on your server.
4. Restart your server.

Installing drivers for the Red Hat Enterprise Linux operating system

This topic provides instructions on installing drivers for the Red Hat Enterprise Linux operating system.

Installing the driver for the chipset

For the Red Hat Enterprise Linux operating system, the driver for the chipset comes with the operating
system installation.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder.
Then, copy the folder to your USB storage device and connect the USB storage device to your server.
2. Copy the folder from your USB storage device to the /tmp directory on your server.
3. Use the following commands to install the driver:
• For the file with the .sh extension:
cd /tmp
cd lxdrv-1-
./update.sh
Note: In the command lines, lxdrv represents the name of the folder that contains the driver. update.
sh represents the driver name. Use the corresponding file name on your server.
• For the file with the .rpm extension:
cd /tmp
cd rpms-2
rpm-ivh *.rpm
Note: In the command lines, rpms-2 represents the name of the folder that contains the driver. *.rpm
represents the driver name. Use the corresponding file name on your server.
4. Restart your server.
.
Chapter 4 Installing drivers
109