Installing The Driver For The Intel Ethernet Card; Installing The Driver For An Hba Card, A Mezzanine Card, Or A Cna Card - Lenovo ThinkServer RD650 Operating System Installation Manual

Installing the driver for the Intel Ethernet card

To install the driver, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder.
Then, copy the folder to your USB storage device and connect the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
tar zxvf ixgbe-x.x.x.x.tar.gz
cd igb -x.x.x.x/src
make install
Notes:
• If the file extension is not .tar.gz, skip the second command.
• In the command lines, igb-x.x.x.x represents the driver name. x.x.x.x represents the driver file version.
Use the corresponding file name on your server.
4. Restart your server.
5. Click Computer. Then, click YaST in the right menu.
6. In the YaST Control Center window, click Network Devices on the left, and then click Network
Settings.
7. In the Network Settings window, all the Ethernet cards are displayed. Select the one you want to
configure, and then click Edit.
8. In the Network Card Setup window, select Statically assigned IP Address.
9. In the IP Address and Subnet Mask area, input your desired configuration, and then click Next.
10. Repeat the previous steps when necessary to configure other Ethernet cards.

Installing the driver for an HBA card, a Mezzanine card, or a CNA card

This topic provides instructions on installing the driver for the following cards:
• Emulex LPe16002B HBA card
• Emulex LPe16000B HBA card
• Emulex LPe1250 HBA card
• Lenovo ThinkServer LPm16002-M6-L Mezzanine card
• Lenovo ThinkServer LPm15004-M8-L Mezzanine card
• Lenovo ThinkServer OCm14104-UX-L Mezzanine card
• Lenovo ThinkServer OCm14102-UX-L Mezzanine card
• Emulex OCe14401-UX DAC NIC/iSCSI/FCoE CNA card
• Emulex OCe14102-UX-L NIC/iSCSI/FCoE CNA card
• Emulex OCe14102-NX NIC/iSCSI/FCoE CNA card
To install the driver for the card, do the following:
1. Download the driver for the card from the Lenovo Web site. If the driver is a compressed file, unzip it to a
folder. Then, copy the folder to your USB storage device and connect the USB storage device to your
server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
.
Chapter 4 Installing drivers
107