Battery Led; Making A Call; Receiving A Call - Doro Arc 6 Instructions Manual

Battery LED

When the batteries are running low,
progress.
Please note that the complete battery indicator in the display will flash as long as the handset is charging, and
when the battery is fully charged only the inner segment will flash.
Range
�he telephone's range depends on whether or not the radio waves carrying the call are restricted by
obstacles in their path, and is usually between 50 and 300 metres. Coverage can be improved by turning
one's head so that the handset is aligned with the base unit. Sound quality declines as the limit is reached
until the call is finally interrupted.
�he symbol is shown when the phone is within range and goes out/flashes when it is out of range.
6

Making a call

Enter the required number. Delete if necessary with right menu button
1.
Press to make the call. Press
2.
q
Please note!
To switch between handset/speaker press . In speaker mode, you cannot both speak at once – you must take it in turns to talk.

Receiving a call

Wait for the handset to ring. Wait for the handset to ring.
1.
Press to answer. Press
2.
q
Volume control
�he volume may be adjusted during a call with
Redial
Press . Scroll among the 10 most recently dialled numbers with
r
Mute button
�he microphone can be switched off/on during a call with
Paging
�he handset will ring when
while or if the button on the handset or the
L
Temporary silent mode
When someone calls, you can press
Softkeys
Note the top two keys are "softkeys". �heir function is shown in the Display directly above them.
will flash and a warning tone will be heard when a call is in
to end the call.
L
to end the call.
L
/
{
(on the base unit) is pressed. �he signal will stop automatically after a
J
(right menu button) to turn off the handset ring signal.
C
English
.
}
/
{
(right menu button).
C
button on the base unit are pressed.
J

.
C
. Press .
} q