Supermicro 6027R-E1CR12N User Manual page 62

S S S
UPER TORAGE YSTEM 6027R-E1CR12N User's Manual
Aggressive Link Power Management
Select Enabled to enable Aggressive Link Power Management support
for Cougar Point B0 stepping and beyond. The options are Enabled and
Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are Enabled and Disabled.
Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent
excessive power consumption caused by multiple HDDs spinning-up
simultaneously. The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Select Intel or LSI to specify the code base to be used for RAID support.
The options are Intel and LSI.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The
options are Enabled and Disabled.
SAS Configuration
OnChip SAS Oprom
Select Enabled to support the onboard SAS Option ROM to boot up the system via
a storage device. The options are Disabled and Enabled.
SAS Option ROM Codebase
Select Intel to use the Intel SAS controller to support onboard SAS Option ROM.
Select LSI to use the LSI SAS controller to support onboard SAS Option ROM.
The options are Intel and LSI.
Device0~Device7: The AMI BIOS will automatically detect the onboard SAS devices
and display the status of each SAS device as detected.
7-16
Thermal Configuration
Thermal Management
Select Enabled to initialize the PCH Thermal subsystem device located at D31:F6.
The options are Enabled and Disabled.
ME SMBus Thermal Reporting
Select Enabled to support ME SMBus (System Management Bus) reporting. The
options are Enabled and Disabled.
PCH Temp Read
Select Enabled to allow the BIOS to read the PCH temperature. The options are
Enabled and Disabled.
CPU Energy Read
Select Enabled to allow the BIOS to read the CPU energy status. The options are
Enabled and Disabled.
CPU Temp Read
Select Enabled to allow the BIOS to read the CPU temperature. The options are
Enabled and Disabled.
Alert Enable Lock
Select Enabled to lock all alert-enabling settings. The options are Enabled and
Disabled.
PCIe/PCI/PnP Configuration
PCI ROM Priority
Use this feature to select the Option ROM to boot the system when there are mul-
tiple Option ROMs available in the system. The options are EFI Compatible ROM
and Legacy ROM.
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96,
128, 160, 192, 224 and 248.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and Disabled.
7-17
Chapter 7: BIOS