Supermicro 6027R-E1CR12N User Manual page 56

S S S
UPER TORAGE YSTEM 6027R-E1CR12N User's Manual
AddOn ROM Display Mode
Use this item to set the display mode for the Option ROM. Select Keep Current to
use the current AddOn ROM Display setting. Select Force BIOS to use the Option
ROM display mode set by the system BIOS. The options are Force BIOS and
Keep Current.
Bootup Num-Lock
Use this feature to set the Power-on state for the Numlock key. The options are
Off and On.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the 'F1' key is pressed if an error
occurs. The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19
at bootup and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant_Off, the system will power off immediately as soon
as the user presses the power button. If this feature is set to 4_Second_Override,
the system will power off when the user presses the power button for 4 seconds or
longer. The options are Instant_Off and 4_Second_Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off
and Last State.
7-4
CPU Configuration
This submenu displays the information of the CPU as detected by the BIOS. It also
allows the user to configuration CPU settings.
Socket 0 CPU Information

This submenu displays the following information regarding the CPU installed
in Socket 0.
•
Type of CPU
•
CPU Signature
•
Microcode Patch
•
CPU Stepping
•
Maximum CPU Speed
•
Minimum CPU Speed
•
Processor Cores
•
Intel HT (Hyper-Threading) Technology
•
Intel VT-x Technology
•
Intel SMX Technology
•
L1 Data Cache
•
L1 Code Cache
•
L2 Cache
•
L3 Cache
Socket 1
This item displays if a CPU is installed in Socket 1.
CPU Speed
This item displays the speed of the CPU installed in Socket 0.
64-bit
This item indicates if the CPU installed in Socket 0 supports 64-bit technology.
7-5
Chapter 7: BIOS