Table of Contents
Advertisement
Troubleshooting
Problem
Programme
time does not
countdown. (On
models with
display) (*)
Product does
not switch to
spinning step. (*)
78 / English
Reason
Timer may stop during water
intake.
Timer may stop during the
heating step.
Timer may stop during
spinning step.
There might be an unbalanced
load in the product.
The product will not spin
if water is not drained
completely.
Excessive foam might have
occurred and automatic foam
absorption system might have
been activated due to too
much detergent.
"No spin" setting may be
adjusted.
Drain pump filter or drain itself
may be clogged.
Solution
* Timer indicator will not
countdown until the product
takes in an adequate amount
of water. The product will
wait until there is a sufficient
amount of water to avoid
poor washing results due to
lack of water. Timer indicator
will resume countdown after
this.
* Timer indicator will not
countdown until the product
reaches the selected
temperature.
* The automatic unbalanced
load detection system might
be activated due to the
unbalanced distribution of
laundry in the product.
* The automatic unbalanced
load detection system might
be activated due to the
unbalanced distribution of
laundry in the product.
* Check the filter and the
draining hose.
* Use recommended amount
of detergent.
* See "Spin Speed Selection".
* Clean the drain pump filter
(See "User maintenance
instructions" ). If the house
drain pipes are clogged, call
a plumber for assistance.
Front-Loading Automatic Washer
Advertisement
Table of Contents
