Table of Contents
Advertisement
Selecting a Program and Operating Your Washer
The bluetooth of your smart device should be on and your device should
be connected to the internet during setup. Your smart device should
be close to the washing machine. After the setup, the bluetooth can
be turned off or your smart device does not need to be close to the
washing machine. You may use your product provided that your smart
device is connected to internet.
You may see the products paired with your account by touching the
"Add/Remove Product" button on the "Products" page in the app. You
may perform the user pairing operation of these products on this page.
After the app is setup, with the Remote Control Function, your washing
machine can give you instant status notifications via your smart device.
C
CAUTION
• Please visit www.homewhiz.com link to learn which Android and
IOS versions are supported by HomeWhiz application.
Your washing machine will send you notifications over
HomeWhiz application in the following cases
• At the end of the programme,
• When the door of the washing machine is opened,
• In case of water cut warning,
• In case of security warning,
C
CAUTION
• In order to use the Remote Control function, the application
should be set up on your smart device and your washing
machine should be connected to your home network. When your
washing machine is not connected to the network, it operates
like a machine without HomeWhiz function.
• Your product shall run with a connection to the wireless network
in your home network. The controls made on the application
shall be provided over this network, so the wireless signal
strength where the machine is located should be adequate.
• Operates at HomeWhiz 2.4 GHz frequency band.
Owner's Guide & Installation Instructions
57 / English
Advertisement
Table of Contents
