Table of Contents
Advertisement
3 Installation Instructions
Read this first !
This washer can be individually installed in free-standing and built-in
installations. You can also install your washer with your dryer as a
free-standing or built-in pair. Before you install your appliance, read
the following instructions completely and carefully:
• Save these instructions for future reference.
• This appliance must be properly installed and grounded by qualified
and skilled technicians in accordance with all local codes and
ordinances and the latest edition of the National Electrical Code,
ANSI/NFPA 70.
• Proper installation of this appliance is the responsibility of the owner
and failure due to improper installation is not covered by the warranty.
C
CAUTION
• Your washing machine automatically detects the amount of
laundry placed inside when selecting a program.
• While installing the product, before the first use, calibration should
be done to ensure that the laundry amount is detected in the
most accurate way.
• To do this, select the Drum Cleaning* program and cancel the
spin function. Start the program without laundry. Wait for the
program to finish, which will take about 15 minutes.
* The program name may vary depending on the model. For the
appropriate program selection, review the program descriptions section.
The Right Location of Installation
You can install your washer in a basement, closet or in a laundry
room if the location has proper drainage, plumbing and power supply
system. Always follow these instructions for installation:
• Do not install or store this appliance where it will be exposed to
the weather, rain, damp places, water and direct sunlight. The
ambient temperature must be higher than 60°F (15.6°C) for proper
operation. Installation location must have the proper ventilation.
Owner's Guide & Installation Instructions
13 / English
Advertisement
Table of Contents
