Varytec Hero Wash 300 FC User Manual page 18

Operating
Manual control
Hero Wash 300 FC
18
moving head
This setting is only relevant if the device is not controlled via a DMX controller and
not working as slave in a master / slave configuration. In this operating mode pan,
tilt, zoom, effects and colours can be set.
1.
Press [SET] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows 'Running Mode' and confirm the
selection with [SET].
3. Press [UP] or [DOWN] until the display shows 'Manual Control' and confirm the
selection with [SET].
4. Press [UP] or [DOWN] to select the desired submenu or the desired value and
confirm the selection with [SET].
The following sub menus are available:
Menu level 3 Menu level 4
'PAN'
'TILT'
'Pan/Tilt Speed'
'Zoom'
'Dimmer'
'Strobe'
'Red 1'
'Green 1'
'Blue 1'
'White 1'
'Red 2'
'Green 2'
'Blue 2'
'White 2'
'Red 3'
'Green 3'
'Blue 3'
Description
'000...540' Adjusts the rotation angle.
'000...240' Adjusts the tilt angle.
'000...255' Adjusts the speed of pan and tilt.
'000...255' Adjusts the initial setting of the
light bundling.
'000...255' Adjusts the dimmer intensity.
'0...30Hz' Adjusts the strobe speed.
'000...255' Sets the intensity for red seg‐
ment 1 (0 to 100%).
'000...255'
Sets the intensity for green seg‐
ment 1 (0 to 100%).
'000...255' Sets the intensity for blue seg‐
ment 1 (0 to 100%).
'000...255' Sets the intensity for white seg‐
ment 1 (0 to 100%).
'000...255' Sets the intensity for red seg‐
ment 2 (0 to 100%).
'000...255' Sets the intensity for green seg‐
ment 2 (0 to 100%).
'000...255' Sets the intensity for blue seg‐
ment 2 (0 to 100%).
'000...255' Sets the intensity for white seg‐
ment 2 (0 to 100%).
'000...255' Sets the intensity for red seg‐
ment 3 (0 to 100%).
'000...255' Sets the intensity for green seg‐
ment 3 (0 to 100%).
'000...255' Sets the intensity for blue seg‐
ment 3 (0 to 100%).