Operating Modes - Varytec Hero Wash 300 FC User Manual

Operating
Setting the DMX address

7.3 Operating modes

Setting the DMX mode
Hero Wash 300 FC
16
moving head
Use the 'DMX Address' menu to set the DMX address. This setting is only relevant if
the device is controlled via a DMX controller.
1.
Press [SET] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows 'DMX Address' and confirm the
selection with [SET].
3.
Press [UP] or [DOWN] to select a value between 1 and 512 for the desired DMX
address (display shows '001' ... '512' ) and confirm the selection with [SET].
Make sure that this number matches the configuration of your DMX controller.
The following table shows the respective highest possible DMX address for the
various DMX modes.
Mode
11-channel mode
15-channel mode
26-channel mode
Use the 'Running Mode' menu to set the operating modes.
In this mode the device is controlled via a DMX controller.
1.
Press [SET] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows 'Running Mode' and confirm the
selection with [SET].
3.
Press [UP] or [DOWN] to select the desired DMX mode and confirm the selec‐
tion with [SET].
The following DMX modes are available:
Menu level 2
'DMX 11CH Mode'
'DMX 15CH Mode'
'DMX 26CH Mode'
Highest possible DMX address
502
498
487
Description
11-channel mode
15-channel mode
26-channel mode