Technical Description Of The Burner; Technical Data; Burner Description; Burner Equipment - Riello G10I Installation, Use And Maintenance Instructions

4

Technical description of the burner

4.1

Technical data

Type
Thermal power – output
Fuel
Electrical supply
Motor
Capacitor
Ignition transformer
Pump
Absorbed electrical power
4.2

Burner description

1 Return line
2 Suction line
3 Gauge connection
nd
4 Pressure regulator, 2
5 Vacuum gauge connection
6 Hydraulic jacks with air-damper
4.3

Burner equipment

Hoses with nipples .............................................................. No. 2
Flange with insulating gasket .............................................. No. 1
Screws and nuts for flange.................................................. No. 4
Screw with two nuts for flange ............................................ No. 1
Maintenance assembly ....................................................... No. 1
External probe..................................................................... No. 1
7 pin plug............................................................................. No. 1
4 pin plug............................................................................. No. 1
20032184
Technical description of the burner
466T1
44/54 – 120 kW
Gas oil, viscosity 4 – 6 mm
Kerosene, viscosity 1.6 – 6 mm
Blends of gasoil and bio fuel (FAME in accordance with EN 14214) up to 30%
Single phase,
Run current 0.8A – 90W – 2800 rpm – 294 rad/s
4 F
Secondary 8 kV – 16 mA
Pressure 7 – 14 bar
0.17 kW
D8078
stage
– 3.7/4.5 – 10 kg/h
2
/s at 20 °C
2
/s at 20 °C
~
50Hz 230 V ± 30%
7 Combustion head adjustment screw
8 Lock-out lamp and reset button
9 Flange with insulating gasket
10 Regulation pressure, 1
11 Economizer
In case of use with gas oil containing up to 30%
Bio blend, it will be essential to use flexible oil
lines suitable for bio fuel use.
Please contact Riello for further information.
WARNING
8
GB
(Hi = 11.86 kWh/kg)
(Hi = 11.97 kWh/kg)
st
stage
Tab. A
Fig. 1