Advertisement
Quick Links
Thank you for choosing the Sanus Systems FM37 flat panel foundation
mount. The Sanus Systems FM37 flat panel foundation mount is designed
to support a flat panel monitor weighing up to 27.3 kg (60 lbs). The
lower shelf supports additional equipment weighing up to 11 kg (25 lbs).
Hardware for multiple mounting configurations is included.
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
Hardware and procedures for multiple mounting configurations are
included. When you see this symbol, choose the correct configuration to
OPT
suit your needs. Not all hardware included will be used.
OPT
USA Customer Service 1-800-359-5520 • info@sanus.com • www.sanus.com
FM37
(6904-100130 <00>)
WARNING
CAUTION
Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA
001480.eps
FPS10 - Full Assembly
Advertisement
Related Manuals for Sanus Systems FM37
Summary of Contents for Sanus Systems FM37
- Page 1 FPS10 - Full Assembly CAUTION Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation or use may cause personal injury and/or property damage. If you do not understand these instructions, or if you have doubts about the safety of the installation, contact Sanus Systems Customer Service.
- Page 2 Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! [03] x 1...
- Page 3 1: Install Pillar on Base [01] [11] [13] 2: Install Brackets on Pillar 001487.eps FPS10 - Install Pillar to Base 001487.eps FPS10 - Install Pillar to Base [05] [15] [06] [07] [13] [04] [15] 001488.eps [05] FPS10 - Install Brackets [14] 6904-100130 <00>...
- Page 4 3: Choose Correct Mounting Plate 75mm x 75mm or 100mm x 100mm [03] [03] 75mm 100mm 75mm 100mm 001482.eps 200mm x 200mm FPS10 - Star [32] NOTE For monitors with 200mm x 200mm hole [03] spacing, you must remove the existing plate from the head assembly [03] and replace it with plate [02].
- Page 5 4: Install Head Assembly on Monitor For Monitors with Flat Back [21], [22], [23] [16], [17], [18] [19], [20] [03] For Monitors with a Curved Back or an Obstruction [28], [29] [03] [19], [20] [16], [17], [18] [25], [26], [27] 6904-100130 <00>...
- Page 6 5: Install Monitor on Pillar [01] 001504.eps [03] [24] 6: Install Shelf [32] [30] [31] [08] [09] 6904-100130 <00> 001504.eps...
- Page 7 7: Install Wire Channel Covers [12] [10] [10] 001506.eps CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.