Table of Contents
Advertisement
OPERATION
32mm
OPERATING THE PRODUCT
NOTE:The lopper has a 32 mm cutting
capacity for softwood, and 28 mm cutting
capacity for hardwood.
WARNING:
During operation, hold the
product with both hands.
1. Remove the blade cover.
2. Install the battery pack in the product.
Make sure that the latches on each side
of the battery pack snap in place and
that the battery pack is securely attached
before using the product.
3. Unlock the telescopic release latch.
Adjust the pole length according to
the required working height. Snap the
telescopic release latch in place. Make
sure that the telescoping collar is locked
securely.
10
1
2
3
1
3
2
Advertisement
Table of Contents
