Recoding From Another Vcr Or Camcorder - Samsung DVD-CM250 Instruction Manual

Recoding from Another VCR or Camcorder

You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied,
to the appropriate SCART input connectors on the rear of your
DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR
or camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR:
AV1, AV2 for the SCART input
AUX for the RCA input
5
Start playing back the cassette to be copied.
6
Hold REC ( ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press
DVD-VCR.
If you wish to view the cassette being copied:
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
on both VCR and
VCR
SELECT
STANDBY/ON PHONES
REC S.MODE COPY PROG P.SCAN
2
6
7
GB
EJECT
VOL
41