Connecting Dvd-Vcr To A Satellite Receiver Or Other Equipment - Samsung DVD-CM250 Instruction Manual

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few
examples of the connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
GB
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
12
Satellite Receiver or other Equipment
TV
SCART Cable
RF coaxial cable
Satellite Receiver or other Equipment
TV
SCART Cable
RF coaxial cable
Aerial Connector
2
DVD & VCR
1
AUX
AUDIO
IN
R
RADIO ANT.
FM
75
L
COAXIAL
AM
VIDEO
Aerial Connector
1
2
DVD & VCR
AUX
AUDIO
IN
R
RADIO ANT.
FM
75
L
COAXIAL
AM
VIDEO
Aerial
OUT
Aerial
OUT