Selecting The Rf Out Sound Mode (B/G-D/K); Setting The Dvd-Vcr Output Channel - Samsung DVD-CM250 Instruction Manual

Selecting the RF OUT Sound Mode (B/G-D/K)

You can choose the sound mode (B/G or D/K) according to the
TV set connected to your VCR.
1 After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result: The Install
4
Press the or
❷
selected.
Press the OK or ❿ buttons to select G or K.
5
6
On completion, press RETURN three times to exit the menu.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result: The Install
4
Press the or buttons, until the
❷
is selected.
5
Select the required output channel (CH21~CH69) by pressing
the OK or ❿ buttons.
CH21
6
On completion, press RETURN three times to exit the menu.
Then tune your television again (see page 14).
, buttons to select the
❷
menu is displayed.
buttons, until the TV System
, buttons to select the
❷
menu is displayed.
VCR Output CH
. . CH36 . . CH69
Install
option is
Install
option
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV System : K
VCR Output CH : CH 36
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV System : K
VCR Output CH : CH 36
23
GB
K
G
CH 21
:
CH 36
:
CH 69