Nicam - Samsung DVD-CM250 Instruction Manual

VCR
Language
Install
User Set
GB
Auto Power Off
Screen Messages
Colour System

NICAM

IPC
ShowView Extend
VCR
Language
Install
User Set
Auto Power Off
Screen Messages
Colour System
NICAM
IPC
ShowView Extend
24
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception
: English
standard when you select AUTO.
: Off
: On
User Set
Auto
PAL
: Auto
MESECAM
: On
B/W
: On
: Off
NICAM
: English
: Off
: On
User Set
: Auto
On
: On
Off
: On
: Off
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to
your TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
After pressing the MENU, press the OK or ❿ .
1
Result: The Setup menu is displayed.
2
Press the corresponding
option.
User Set
3 Press the OK or ❿ to select this option.
Result: The User Set
4
Press the corresponding
System option is selected.
5 Press the OK or ❿ button to select
Auto When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6
On completion, press RETURN three time to exit the menu.
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard
mono sound broadcast and you can select the desired sound.
Please refer to page 35.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
User Set option.
3 Press the OK or ❿ to select this option.
Result: The
User Set
4
Press the corresponding
options selected.
5
To...
Mono mode
NICAM mode
6
On completion, press RETURN three times to exit the menu.
, buttons to select the
❷
menu is displayed.
or buttons, until the
❷
Auto PAL MESECAM B/W
, buttons to select the
❷
menu is displayed.
or buttons, until the
❷
Press OK or ❿, until...
Off is displayed.
Off: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo sound is
distorted due to inferior reception
conditions.
On is displayed.
On: Normally set at this position.
Colour
.
NICAM