Maintaining the printer
4
Unpack the new fuser.
5
Insert the new fuser.
6
Close doors D and A.
7
Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
8
Reset the fuser maintenance counter. For more information, see
page
96.
Replacing the pick roller
Replacing the pick roller in the 550‑sheet tray
1
Turn off the printer, and then unplug the power cord from the electrical outlet.
2
Remove the tray.
Warning—Potential Damage: To prevent damage from electrostatic discharge, touch any exposed metal
frame of the printer before accessing or touching interior areas of the printer.
"Resetting the maintenance counter" on
81