3.3 Installing the Strip Sensors 剥離センサーの取り付け
1. Release the hook on the top of Operation Panel by pushing it up, and then Detach the Operation Panel.
操作パネル上部の爪を押し上げてフックを解除紙、操作パネルを本体から取り外します。
Hook
爪
2. Secure the strip sensor (LED) to the Front Panel and strip sensor (Tr) to the Operation Panel with the
PT-3x6 screws. Then place the connected harnesses along the hook or clamp in the back side of the Panel.
ネジ(PT-3x6)を 1 本ずつ使って剥離センサー(LED)をフロントパネル(右)、剥離センサー(Tr)を
操作パネルに取り付けます。接続したハーネスを、写真のようにパネル裏側に納めます。
Operation Panel
操作パネル
Strip Sensor (Tr)
剥離センサー(Tr)
Cable Hook
ケーブルフック
Operation Panel
操作パネル
PT-3x6 Screw
ネジ(PT-3x6)
Strip Sensor (LED)
剥離センサー(LED)
PT-3x6 Screw
ネジ(PT-3x6)
11
Front Panel (R)
フロントパネル(右)
Cable Clamp
ケーブルクランプ
JEO2-38109