Jenn-Air KitchenAid KBSD708M S00 Series Technical Manual page 27

2. Remove the four (4) 1/4" hex head screws and disconnect the
wire harness to remove the assembly.
3. Remove the gasket and foam to remove the air baffle.
Figure - Removing the Gasket
Figure - Removing the Foam
Figure - Removing the Air Baffle
Removing the RC Lower Air Diffuser and
Thermistor Assembly
1. Remove drawer to locate the air diffuser assembly.
2. Remove two (2) 1/4" hex head screws.
3. Disconnect both wire harness connections to remove the
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
COMPONENT ACCESS (CONT.)
assembly.
4-7
n