IKEA HACKSTAD Manual page 17

en
Bridge Function (only for BLACKS-
TAD and ÄLMESTAD
The Bridge function allows you to use
an extra-long piece of cookware such
as a griddle on the left side of your
cooktop.
If one of the left cook zones is active and
cookware is detected in both of the left
zones, the bridge function becomes available and the
Bridge Indicator will light up.
Figure 19: Bridge Indicator
Touch the Bridge Indicator to activate the bridge
function. The Bridge Indicator will turn red. The
cook zone indicator for the other bridge cook zone
will also turn red, and the cook zone setting for both
of the bridged zones will match. The setting controls
for the front left zone will control both of the bridged
zones as long as the bridge function is active.
Figure 20: Active bridge function
At any time, you can change the setting for the
bridged cook zones by pressing the number of the
new setting on the active control.
To deactivate the bridge function, press the Bridge
Indicator or deactivate one of the bridged cooking
zones by pressing its On/Off key.
SETTING SURFACE CONTROLS
Serve Warm
Serve Warm allows you to keep cooked
food warm for serving. When you ac-
tivate Serve Warm, all active cooking
zones will be set to a low setting.
To activate Serve Warm, press the Serve Warm In-
dicator. The indicator will turn red, and you will see
the settings change on the active cooking zones.
To deactivate Serve Warm, press the Serve Warm
Indicator again. All of the active cooking zones will
turn off. You can also press the main Power key to
turn the cooktop off.
CAUTION
Serve Warm is not intended to cook food. Only
use Serve Warm with food that is already cooked.
Cover pots with lids to maintain proper serving
temperature.
17