Dometic COOLMATIC FC40 Operating Manual page 13

FC40
7.6 Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
7.7 Replacing the plug fuse (12/24 V)
➤ Pull the adapter sleeve (fig. 3 4, page 3) off of the plug.
➤ Unscrew the screw (fig. 3 5, page 3) out of the upper half of the housing
(fig. 3 1, page 3).
➤ Carefully raise the upper half of the housing from the lower (fig. 3 6, page 3)
half.
➤ Take out the contact pin (fig. 3 3, page 3).
➤ Replace the defective fuse (fig. 3 2, page 3) with a new one that has the same
rating (8A, 32V).
➤ Re-assemble the plug in the reverse order.
EN
Operation
13