Dometic COOLMATIC FC40 Operating Manual page 12

Operation
7.5 Using the cooler
A
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently far away
from walls and other objects so that the air can circulate.
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air can
dissipate.
I
NOTE
Place the cooler as shown (fig. 1, page 2). If you operate the box in a
different position it can be damaged.
➤ Connect the cooler, see chapter "Connecting the cooler" on page 11.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Switch on the cooler on by turning the temperature controller (fig. 2, page 3) to
the right.
Setting the temperature
You can set the temperature to any level using the control knob. The controller reg-
ulates the temperature as follows:
• Min. (left limit) = warmest setting
• Max. (right limit) = coldest setting
I
NOTE
The cooling performance can be affected by:
• The ambient temperature
• The amount of food to be conserved
• The frequency with which the door is opened.
12
FC40
EN