Samsung NV51 700S Series User Manual page 54

Operating the oven
CAUTION
Wear gloves during cleaning.
After a steam-cleaning cycle
• Use cautious when opening the door before a steam-cleaning procedure has ended. The
water on the bottom is hot.
• Open the oven door and remove the remaining water with a sponge. Do not leave the
residual water in the oven for any length of time. Wipe the oven clean and dry with a soft
cloth. Do not forget to wipe under the oven door seal.
• Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven
interior. Remove stubborn residue with a nylon scourer. You can remove lime deposits
with a cloth soaked in vinegar.
• If the oven remains dirty, you can repeat the procedure once the oven has cooled.
• For heavy residue, such as grease left over from roasting, we recommend that you rub
detergent into the residue before activating the steam-cleaning function.
• After cleaning, leave the oven door ajar at a 15° angle to allow the interior enamel
surface to dry thoroughly.
Descale
If you use Steam Bake or Steam Roast functions frequently, we recommend descaling
regularly to remove minerals from the oven that may affect the taste or quality of food
cooked. When running a descaling cycle, use only descaling agents that are specific to steam
ovens or coffee machines.
NOTE
If you use Steam Bake or Steam Roast functions for more than a total of 12 hours,
the Descale indicator turns on. You can still enable the Steam Bake or Steam Roast functions
for the next two hours without descaling. However, after those two hours are up, the Steam
Bake or Steam Roast functions will be disabled until you run a descaling cycle.
54 English
How to run a descale cycle
4:35 PM
Flex Upper OVEN Clean Flex Lower
Clean
MODE
Oven cleaning
Oven cleaning
Off Off
Open/Close
Self clean Self clean Steam clean Steam clean
Light
Reservoir
Smart
Settings
Descale Descale Drain Drain
Control
4:35 PM
Descale
Flex Upper OVEN Descale Flex Lower
MODE
Please descale Water Reservoir to improve quality. Please descale Water Reservoir to improve quality.
Off Off
Open/Close
Light
Reservoir
Clean Time
Settings Clean Time Smart
3 3 00 00 Start Start Control
hr min
hr min
Descale
Descale
4:35 PM
Flex Upper Flex Lower
Pour 13.5oz (400ml) water
Pour 13.5oz (400ml) water
and 1.7oz (50ml) descaling and 1.7oz (50ml) descaling
Off Off
solution into Water solution into Water
Reservoir.
Reservoir.
Open/Close
Light
Reservoir
Smart
Settings
OK Control
OK
4:35 PM
Flex Upper Descale Flex Lower
Descale
Draining... Draining...
Off Off
Caution: Hot Water.
Caution: Hot Water. Open/Close
Light
Do not remove Water Reservoir while draining. Reservoir
Do not remove Water Reservoir while draining.
Settings Smart
Control
Descale
Descale
4:35 PM
Flex Upper Flex Lower
Pour 22 oz (650 ml) of water
Pour 22oz (650ml) of water
into Water Reservoir to rinse. into Water Reservoir to rinse.
Off Off
Open/Close
Light
Reservoir
Smart
Settings
Control
1. Swipe the screen to Clean. The display will
show 4 cleaning selections.
2. Tap Descale.
3. Tap Start.
4. Follow the on-screen instructions.
It takes 3 hours to complete the cycle.
• Empty and clean the water reservoir,
and then fill it with 1.7 oz (50 ml) of
descaling agent and 13.5 oz (400 ml) of
drinkable water.
5. When descailling is complete, the oven
drains water automatically.
6. Use oven gloves to remove and empty the
water reservoir, and then refill it with 22 oz
(650 ml) of drinkable water for rinsing.
7. Follow the on-screen instructions, and then
tap OK to start rinsing.