Samsung NV51 700S Series User Manual page 52

Operating the oven
4:35 PM
Flex Upper Self clean Self clean Flex Lower
Oven cleaning Oven cleaning
Off Off
Open/Close
Light
Reservoir
Clean Time Delay Start
Clean Time Delay Start Smart
Settings
3 3 00 00 None None Next Next Control
hr hr min min
4:35 PM
Set start time Set start time
Flex Upper Flex Lower
4 35
: AM
PM
Off Off
End at 12:38PM
End at 12:38PM
Open/Close
Light
Reservoir
1 2 3 4 5
Smart
Settings
Control
6 7 8 9 0 OK
4:35 PM
Flex Upper Flex Lower
Self clean Self clean
Oven cleaning Oven cleaning
Off Off
Open/Close
Light
Reservoir
Clean Time Clean Time Delay Start Delay Start
Settings Smart
3 00 None
3 00 None Next Next Control
hr hr min min
4:35 PM
Self clean Self clean
Flex Upper Flex Lower
Please remove all pans
Please remove all pans
Off Off
and racks from oven.
and racks from oven.
Then, press the Smart
Open/Close
Then, press the Smart
Light
Reservoir
Control for 3 secs to
Control for 3 secs to
begin.
begin.
Smart
Settings
Control
52 English
6. If you don't want to use the Delay Start
feature, go to Step 8. Otherwise, tap Delay
Start, and then go to Step 7.
7. Set the time you want self-cleaning to start,
and then tap OK.
8. Tap Next.
9. Press the Smart Control for 3 secs to begin
self-cleaning. The motor-driven door lock
will engage automatically.
4:35 PM
Flex Upper Flex Lower
OVEN Self clean Self clean
MODE
Cleaning in progress... Cleaning in progress...
Off Off
Open/Close
Light
Reservoir
End at 07:48 AM
End at 07:48 AM
Time Left Time Left Smart
Settings
3 00 Control
3 00
hr hr min min
NOTE
• You will not be able to start a self-cleaning cycle if the control lockout feature is
activated or if the oven's temperature is too hot.
• The oven doors lock automatically. The display will show the cleaning time remaining.
You cannot open the oven doors until the temperature drops to a safe/cool temperature.
• Clean the transparent cover of the camera and the upper LED glass regularly to monitor
through the camera. If there are severe stains on these parts, perform self cleaning and
then wipe them by using a scouring pad.
• Do not clean it with a stainless steel spiral pad. It may cause scratches or other damage
to the lens.
After a self-cleaning cycle
• You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven
cools. (If white spots remain, remove them with a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.)
• If the oven is not clean after one cycle, repeat the cycle.
• You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
10. If you need to stop or interrupt a self
cleaning cycle, tap Off.