IDEX FIRE AND SAFETY
E3 Connect – Battery and Charger Alerts
Alert
Tool Firmware
• Early Fault Detection and Reduction of Downtime
Battery Firmware
Battery State of Charge
Battery Safety Message
Battery Health
Charger Firmware
34
Source
Description
Battery
New tool firmware available for download
Battery
New battery firmware available for download
Battery
Battery capacity less than 35% at last data transfer
Battery
Current consumption detected by battery is too high
Battery
Measures the battery's ability to hold a charge
Charger
New charger firmware available for download
Suggested Action
Download firmware. Place tool into firmware update mode and download to
tool. Tool is updated
Download firmware. Put tool into firmware update mode and download to
tool with battery attached to tool for update. Battery is updated
Charge battery
Inspect connected devices to battery
Conduct diagnostic on battery and potentially replace
Download firmware. Put tool into firmware update mode and download
firmware to tool with battery attached. Remove battery and place on
charger. Charger is automatically updated