IDEX FIRE AND SAFETY
Sending Data
Data Collection Directly from the Tool
• E3 automatically collects data from the tool, battery, and charger when activated
• After 20 minutes of inactivity E3 will attempt to push data through the Wi‐Fi
connection, should it fail to get a connection 3 times it will wait 45min and make
a finally attempt
Data is Transferred Via Wi‐Fi
• Each E3 CONNECT Tool is equipped with a Wi‐Fi enabled chip
• Valid Wi‐Fi networks are configured by the user
Data is uploaded via Wi‐Fi Router Connection
• Tools can store up to 10 unique Wi‐fi networks and will connection the strongest
signal when it's time to send data
• Collected data is visible in Captium shortly after the send process starts
19