IDEX FIRE AND SAFETY
Configuring the Tool to Connect to the Wi-Fi
1. Once connected to the tools access point Open any web browser and navigate the URL to
http://192.168.66.1/ or scan QR code on serial tag
2. Click on the Network SSID drop down and select the network the E3 tool should connect
to for internet access and enter the password
3. If you need to enter multiple networks press 'Next' if you are finished press the 'Save' or
'Finish' button
4. The tools LEDS' should start to flash, wait until the flashing stops before
23
Enter credentials for your
station Wi‐Fi or hotspot
Click "Save" or "Finish"