Table of Contents
Advertisement
On the password input interface, click the Enter password box, and the numeric
keyboard box will pop up.
Put in factory password 66666 in keyboard, click OK to enter the password setting
interface;
On the password setting interface, click the Enter password box, and the numeric
keyboard box will pop up. Put in a new 6-digit password, then click the re-enter the
new password box, put in the same 6-digit new password, and click OK.
If the two passwords are inconsistent, a password inconsistency box will pop up.
07
After re-entering the same new password, click OK to complete the password change.
Note that you must remember the 6-digit new password after change. If you forget it,
you can only restore it and reset it, which will cause the loss of the customized sinter-
ing program.
4) Sintering program display box:
When you need to customize sintering program or select a defined sintering program,
click the sintering program display box to enter the program setting interface.
08
Advertisement
Table of Contents
