Table of Contents
Advertisement
01
/Basic Information
1.1 Description
Dear customers: Thank you very much for purchasing F20 smart sintering furnace
from UP3D TECH, which is suitable for sintering and crystallization of zirconia resto-
rations. Incorrect operation may damage the equipment and may cause personal
injury. Please follow the safety instructions in the manual and read the operating
instructions carefully.
Enjoy using the F20!
1.2 Operation Precautions
01
If you lose the manual, you can contact technical support of UP3D Tech for an
additional copy.
02
/Product Description
2.1 Components
F20 smart sintering furnace is a sintering equipment suitable for zirconia restorations
crystallization.
The temperature in the chamber can be heated up to 1600 degree. It's controlled
intelligently by the corresponding control system and control software during sinter-
ing. The target and actual temperature in the furnace can be displayed in real time.
The F20 smart sintering furnace includes
the following components:
- 1 sintering furnace body
- 1 hearth base and 1 hearth
- 3 sintering tray with cover
- 1 pack of sintering beads
- 1 sintering tweezers
- 1 power cord
2.2 Hazardous Areas
The hazardous area of the F20 sintering furnace is shown in the table below:
Dangerous area
Sides of furnace
Lifting areas
Furnace internal parts
Hazard type
Burn hazard
Crush hazard
Electric shock hazard
02
Advertisement
Table of Contents
