Electrical Requirements; Product Notices - Kohler K-1457T-G Installation Instructions Manual

Experience bubble massage bath
Table of Contents

Advertisement

Important Information
NOTICE: Follow all local plumbing and electrical
codes.
Grounding is required. The unit should be installed by
a qualified service representative, and grounded.
Building materials and wiring should be routed away
from the blower body and other heat-producing
components of the unit.
Install to permit access for servicing.
A pressure wire connector marked Earth/Ground is
provided within the wiring compartment. To reduce
the risk of electric shock, connect this connector to the
grounding terminal of your electric service or supply
panel with copper wire equivalent in size to the circuit
conductor supplying this equipment.
Pressure wire connectors are provided on the exterior
of the junction box or control within this unit to permit
connection of a bonding conductor between this unit
and all other exposed metal in the vicinity, as needed to
comply with local requirements.
PRODUCT INFORMATION

Electrical Requirements

The installation must have a Class A Ground-Fault
Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB). The GFCI or ELCB protect
against line-to-ground shock hazard. Use a 220-240 V,
15 A, 50/60 Hz dedicated service for the bath with
airjets.

Product Notices

WARNING: Unauthorized modification may
cause unsafe operation or effect performance
of the bath with airjets. Do not relocate the
bath blower motor, or make other modifications
to the bath system in the absence of kit or other
published instructions, as this could adversely
affect the performance and safe operation of the
bath with airjets. Kohler China shall not be liable
under its warranty or otherwise for personal
injury or damage caused by any such
unauthorized modification.
WARNING: Keep the area around the blower
motor clean and free of debris. Ensure that the
area around the blower motor is free of sawdust,
insulation, dirt, or other small loose debris. Such
material could clog the blower motor air ducts
and reduce the air flow through the blower.
1070462-T01-B
(cont.)
''
''
( )
ELCB
15
50/60
-2-
/
Earth/Groud
A
GFCI
ELCB
220-240
(GFCI)

Advertisement

Table of Contents
loading

This manual is also suitable for:

K-1744t-g1p k-1744t-g58

Table of Contents