Reference Items - LG ROBOKING VR668 V Series Owner's Manual

REFERENCE ITEMS

Open source software notice
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
Removing / Refitting the battery pack
1
Turn off the main power switch
on the back-left side of the
Robot Cleaner.
6
Refit the battery in the
reverse order.
WARNING
Please be careful of fire, explosion, electric shock, or breakdown.
• Do not charge this Battery Pack with any other type of charger other than the one originally
provided with the Robot Cleaner.
• Do not damage the battery pack in such ways as dropping, crushing, cutting, or shorting extemal
contacts.
• Do not attempt to disassemble the Robot Cleaner or the battery pack In any case. When the
battery pack is damaged or malfunctioning, bring it and the Robot cleaner and Home station to
an authorised service center.
• Do not place the battery pack near a heat source or do not dispose of in fire or water.
• Please keep the battery pack away from any damp or wet environment when the pack is charged.
• Please keep away from children, infants and pets.
64
2
Place a soft cloth on the floor,
remove the dust bin, and flip
the Robot Cleaner over.
5
Press the connector release
lug on the connecting plug to
disconnect the battery wiring.
3
Remove the screws by using
a Phillips head screwdriver.
4
Remove the battery from the
device.