LG ROBOKING VR668 V Series Owner's Manual page 42

SMART APPLICATION FUNCTION
HomeView (Cleaning)
You can change to the cleaning mode during HomeView and have the Robot Cleaner start cleaning
by clicking "Start cleaning."
Click "Start cleaning" to engage the cleaning mode. You can select another cleaning mode by
clicking the "Mode setting" button before pressing the "Start cleaning" button.
Tip
• Spiral Spot mode is not available whilst the cleaner is on the charging station.
• My space cleaning mode can only be selected with the remote control.
• Click any blank area to make the buttons disappear; click again to show the buttons
again.
[During Cleaning]
While the Robot Cleaner is cleaning, the "Stop cleaning" button is displayed. Click it to stop the
Robot Cleaner.
Click "Mode setting" to turn on or off the Repetition Mode, Turbo Mode, or Lighting on and off
(Lighting is active at maximum power when turned on and at low power when turned off).
40
[Waiting to clean]