LG ROBOKING VR668 V Series Owner's Manual page 45

Table of Contents

Menu - HomeGuard (Location setting)

To start HomeGuard, first, you have to set the location where the Robot Cleaner will remain during the

HomeGuard mode. Select the location on the virtual map.

1. Click the target location on the map or drag the Robot Cleaner to the desired location within the

designated area. The monitoring location can be continuously changed before it is saved.

[Location setting]

Tip

• The Home Guard monitoring location can only be within 1.5m to the right and left side

and within 3m from the front of the home station. If the Home Station is relocated, the

Home Guard position will always use the Home station as the starting point, and so the

Home Guard position will need to be set again.

2. Use the two arrows on both sides of the video feed to set the desired direction.

Tip

• If the Home Guard mode has been terminated, or the mode is stopped due to low

battery level, the Robot Cleaner exits Home Guard mode and returns to the Home

station where it will remain on charge until further command.

SMART APPLICATION FUNCTION

[Location setting1]

[Location Setting]

[Location setting2]

Table of Contents