Advertisement
Available languages
Available languages
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding
can cause greater accumulation of dirt on the unit's optics.
Make sure the area below the installation place is free from unwanted persons during servicing
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any deformation
The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is
detected
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified
TECHNICAL SPECIFICATION
Rated voltage
: AC220～240V 50Hz
Rated power
: 20W
LED
: 6x 3W (Red 2x, Green 1x, Blue 1x, Amber 1x, White 1x)
Fuse
: F3A
Function
: Auto or Sound mode
Dimensions per unit
: 290 x 343 x 211mm
Weight (per unit)
: 2.8kg
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed
without prior notice.
www.tronios.com
Copyright © 2014 by TRONIOS the Netherlands
9
Advertisement
