Troubleshooting - Philips JetSet Control HP4882 Manual

3 ENGLISH

Troubleshooting

If problems should arise with your hairdryer and you are unable to solve them by
means of the troubleshooting guide below, please contact the nearest Philips
service centre or the Philips Customer Care Centre in your country.
Problem Solution
The appliance does not Perhaps the socket to which the appliance has been
work at all. connected is not live:
Make sure the socket is live.
The appliance may have overheated and switched itself
off:
Unplug the appliance and let it cool down for a few
minutes. Before you switch the appliance on again, check
the grilles to make sure they are not blocked by fluff, hair,
etc.
The appliance may not be suitable for the voltage to
which it has been connected:
Make sure that the voltage indicated on the type plate of
the appliance corresponds to the local mains voltage.
The mains cord of the appliance may be damaged:
If the mains cord is damaged, it must be replaced by
Philips, a service centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
JetSet Control
HP4883, HP4882
4222 002 61401